DS PH200M 39mm Powermatic 80

Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel

Reference: C036.207.18.106.00
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #0
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #4
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #6
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #5
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
Women watch ∙ Automatic ∙ Mother of pearl ∙ 316L stainless steel - #3
EUR 1 085.-
?
Reserve in boutique
Find a store
With a diameter of 39 mm, the renowned DS PH200M cuts an extremely fine figure on any wrist. Elegant mother of pearl, ceramic and diamonds are perfectly complemented by the favourite (non-)colour of fashionistas the world over, as well as a strap made from sustainable #tide ocean material®. Its ultra-modern automatic calibre and a water resistance of up to 200 metres ensure that this timepiece boasts both precision and power.

Variants

Technical specifications

Reference
C036.207.18.106.00
Warranty
2-year warranty
Weight net
74.00g
Color
Mother of pearl
Material
Diamond(s)
It is rightfully considered to be the king of gemstones: Diamond is the hardest natural material in the world. Rough diamonds are polished for use in the watch and jewellery industry and assessed by means of the four "C" criteria: Cut: The cut refers to the individual shape of the diamond. The more meticulously and professionally the stone has been faceted, the more intensively it reflects the light. Certina uses brilliant-cut diamonds for the case and octagon-cut ones for the dial. Colour: At first glance, you would be forgiven for thinking that all diamonds are white. However, experts distinguish between fine nuances in shades - Certina only uses Top Wesselton diamonds. Clarity: Almost every diamond has minimal inclusions which can be detected by a professional through a magnifying glass but are usually invisible to the naked eye. Certina processes diamonds from the coveted VSI (very small inclusions) grade. Carat: The carat is the unit that defines the weight of a diamond. One carat is equal to 0.2 g. The diamonds used by Certina have different carat numbers depending on the model - they are noted for each watch in the sales manual. Certina only uses diamonds which fulfil the conditions of the Kimberley Process, an international system for certifying rough diamonds. It helps to prevent trade in smuggled diamonds - referred to as "blood diamonds" - which are used to finance wars.
Mother of pearl
MOP is the acronym for mother-of-pearl. This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.
Type
Automatic
Model
POWERMATIC 80.611
Features
Automatic
80-hr power reserve
The power reserve provides you with information about how long a mechanical timepiece can run for without being wound. Most timepieces have a power reserve of around 38 to 42 hours. Certina's innovative Powermatic 80 automatic calibre offers a power reserve of up to 80 hours - almost double as long as comparable models.
Nivachron
An innovative new titanium-based alloy that is used for balance springs. This revolutionary material was developed in collaboration with the Swatch Group and is used in selected brands. Nivachron springs are highly resistant to magnetic fields, shock, ageing and temperature fluctuations, lending them extremely high mechanical precision and making them remarkably reliable in everyday use.
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Synthetic
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Reference
C036.207.18.106.00
Warranty
2-year warranty
Weight net
74.00g
Case material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Bezel material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Ceramic
The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900 °C. Certina's ceramic bezels, cabochons and strap elements not only look good - they are also scratch-resistant and hypoallergenic, and they retain their intensive colour and shine for a long time.
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Up to a pressure of 20 bar (200 m)
Diameter
39.00mm
Height
11.90mm
Between lugs
18.00mm
Color
Mother of pearl
Material
Diamond(s)
It is rightfully considered to be the king of gemstones: Diamond is the hardest natural material in the world. Rough diamonds are polished for use in the watch and jewellery industry and assessed by means of the four "C" criteria: Cut: The cut refers to the individual shape of the diamond. The more meticulously and professionally the stone has been faceted, the more intensively it reflects the light. Certina uses brilliant-cut diamonds for the case and octagon-cut ones for the dial. Colour: At first glance, you would be forgiven for thinking that all diamonds are white. However, experts distinguish between fine nuances in shades - Certina only uses Top Wesselton diamonds. Clarity: Almost every diamond has minimal inclusions which can be detected by a professional through a magnifying glass but are usually invisible to the naked eye. Certina processes diamonds from the coveted VSI (very small inclusions) grade. Carat: The carat is the unit that defines the weight of a diamond. One carat is equal to 0.2 g. The diamonds used by Certina have different carat numbers depending on the model - they are noted for each watch in the sales manual. Certina only uses diamonds which fulfil the conditions of the Kimberley Process, an international system for certifying rough diamonds. It helps to prevent trade in smuggled diamonds - referred to as "blood diamonds" - which are used to finance wars.
Mother of pearl
MOP is the acronym for mother-of-pearl. This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.
Type
Automatic
Model
POWERMATIC 80.611
Features
Automatic
80-hr power reserve
The power reserve provides you with information about how long a mechanical timepiece can run for without being wound. Most timepieces have a power reserve of around 38 to 42 hours. Certina's innovative Powermatic 80 automatic calibre offers a power reserve of up to 80 hours - almost double as long as comparable models.
Nivachron
An innovative new titanium-based alloy that is used for balance springs. This revolutionary material was developed in collaboration with the Swatch Group and is used in selected brands. Nivachron springs are highly resistant to magnetic fields, shock, ageing and temperature fluctuations, lending them extremely high mechanical precision and making them remarkably reliable in everyday use.
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Synthetic
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Product sheet
DanskDeutschEestiEnglishEspañolFrançaisItalianoMagyarNederlandsNorsk, nynorskPolskiPortuguês, PortugalSlovenčinaSuomiSvenskaTürkçeČeštinaΕλληνικάРусскийעבריתالعربيةفارسی日本語简体中文繁體中文한국어

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Ceramic

The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900°C. Certina's ceramic bezels, cabochons and strap elements not only look good – they are also scratch-resistant and hypoallergenic, and retain their intense colour and shine for a long time.

ceramic

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

diamonds

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Ceramic

The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900°C. Certina's ceramic bezels, cabochons and strap elements not only look good – they are also scratch-resistant and hypoallergenic, and retain their intense colour and shine for a long time.

ceramic

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

diamonds

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal