DS-8 Chronograph Moon Phase

Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel

Reference: C033.460.16.087.00
Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel - #0
Men watch ∙ Quartz ∙ Grey ∙ 316L stainless steel - #3
EUR 950.-
?
Find a store
The moon phase – amongst the most classic complications in watchmaking – looks especially modern and minimalist on this chronograph. The COSC-certified chronometer also boasts stylish colour combinations which beautifully accentuate its harmonious design.

Variants

Technical specifications

Reference
C033.460.16.087.00
Warranty
3-year warranty
Weight net
83.00g
Color
Grey
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Quartz
Model
G10.962
Features
Chronograph 12 h
Moon phase
The moon goes through an average cycle lasting 29.53 days. Depicting moon phases is a watchmaking complication which is both traditional and complex: The moon's current profile is presented through a cut-out in the dial by means of a rotating disc.
Quartz
End of life
Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.
Chronometer
A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.
ETA
Swiss Made
Material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Reference
C033.460.16.087.00
Warranty
3-year warranty
Weight net
83.00g
Case material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Bezel material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Up to a pressure of 10 bar (100 m)
This information about the water resistance states the specified overpressure and diving depth to which a watch can be subjected and still remain in working order. As a general rule, we do not recommend wearing watches that are water-resistant to less than 10 bar (100 m) when swimming or diving. All Certina timepieces can withstand a pressure of at least 10 bar (100 m) stand - some of our watches can even withstand considerably higher pressures!
Length
41.00mm
Width
42.00mm
Height
11.80mm
Between lugs
21.00mm
Color
Grey
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Quartz
Model
G10.962
Features
Chronograph 12 h
Moon phase
The moon goes through an average cycle lasting 29.53 days. Depicting moon phases is a watchmaking complication which is both traditional and complex: The moon's current profile is presented through a cut-out in the dial by means of a rotating disc.
Quartz
End of life
Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.
Chronometer
A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.
ETA
Swiss Made
Material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Product sheet
DanskDeutschEnglishEspañolFrançaisItalianoMagyarNederlandsNorsk, nynorskPolskiPortuguês, PortugalSlovenčinaSuomiSvenskaTürkçeČeštinaΕλληνικάРусскийעבריתالعربيةفارسی日本語简体中文繁體中文한국어
Moon phase DS8

Moon phase

The moon phase display is a rotating disc that displays the age of the moon through an aperture in the dial. It can be set by referring to a current lunar calendar. A complex complication, and unquestionably one of the most attractive displays.

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal