DS-2 Chronograph Automatic

Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel

Reference: C024.462.18.041.00
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #0
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #4
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #6
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #5
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ Blue ∙ 316L stainless steel - #3
EUR 2 250.-
?
Buy online
Reserve in boutique
The new Chronograph from Certina is inspired by a timepiece that was at the height of its time – literally! The predecessor of the DS-2 Chronograph Automatic gave proof of its sterling qualities during a spectacular expedition to Mount Everest. The new model transports this spirit of adventure into the 21st century, with a sporty-elegant vintage design and silicon technology. In this way, traditional savoir-faire is carried over stylishly to the next generation.

Variants

Technical specifications

Reference
C024.462.18.041.00
Warranty
2-year warranty
Weight net
115.00g
Color
Blue
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Automatic
Model
A05.231
Features
Chronograph 30 min.
Automatic
Silicon
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Synthetic
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Reference
C024.462.18.041.00
Warranty
2-year warranty
Weight net
115.00g
Case material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Up to a pressure of 20 bar (200 m)
Length
40.50mm
Width
43.36mm
Height
15.25mm
Between lugs
20.00mm
Color
Blue
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Automatic
Model
A05.231
Features
Chronograph 30 min.
Automatic
Silicon
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Synthetic
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Product sheet
DanskDeutschEestiEnglishEspañolFrançaisItalianoMagyarNederlandsNorsk, nynorskPolskiPortuguês, PortugalSlovenčinaSuomiSvenskaTürkçeČeštinaΕλληνικάРусскийעבריתالعربيةفارسی日本語简体中文繁體中文한국어

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal