DS Action Diver Chrono

Men watch ∙ Automatic ∙ 316L stainless steel

Reference: C032.827.18.271.00
Men watch ∙ Automatic ∙ 316L stainless steel - #0
Men watch ∙ Automatic ∙ 316L stainless steel - #4
Men watch ∙ Automatic ∙ 316L stainless steel - #6
Men watch ∙ Automatic ∙ 316L stainless steel - #5
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
Men watch ∙ Automatic ∙ 316L stainless steel - #3
CHF 1 750.-
?
Find a store
The warmer months have arrived, drawing people into the water. Certina now presents a new mechanical wristwatch that perfectly captures this carefree summer exuberance. The DS Action Diver Chrono is a robust diver's watch with water resistance of up to 30 bar (300 metres), which meets the strict requirements of ISO 6425, making it an essential piece of kit for those venturing underwater. But the chronograph cuts a stylish figure on dry land too, with its sand-coloured dial and striped strap, making it a maritime companion around the clock.

Variants

Technical specifications

Reference
C032.827.18.271.00
Warranty
2-year warranty
Weight net
140.00g
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Automatic
Model
VALJOUX A05.231
Features
Chronograph 30 min.
Automatic
Silicon
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Reference
C032.827.18.271.00
Warranty
2-year warranty
Weight net
140.00g
Case material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Bezel material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Ceramic
The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900 °C. Certina's ceramic bezels, cabochons and strap elements not only look good - they are also scratch-resistant and hypoallergenic, and they retain their intensive colour and shine for a long time.
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Glass
Antireflection treatment on one side
It is possible to enhance the quality of a sapphire crystal to an even greater extent by providing it with an anti-reflective coating on one or both sides. The Certina brand is becoming increasingly focussed on equipping its timepieces with an extremely high-quality anti-reflective coating on both sides, whereby several layers of this coating on both sides of the crystal ensure that it is possible to see through the timepieces in an optimum manner.
Sapphire crystal
Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000 °C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is therefore used by Certina in all of its models to protect the dials.
Water resistance
Diver's watch 300m according to ISO 6425:2018
A divers' watch is a water-resistant and pressure-resistant wristwatch. Certina tests each and every one of these timepieces in water for three hours, as is required by ISO standard 6425. This standard includes a whole host of demanding criteria that a watch must meet in order to be able to be officially called a "divers' watch":o A device for preselecting a period of time (e.g. rotating bezel)o Readability from 25 cm in complete darkness o Proper functionality in water o Straps, crowns and other components resistant to external forces, salt water and thermal shocko Antimagnetic propertieso Water-resistant to the given diving depth plus 25% of this depth o Shock resistance
Diameter
44.60mm
Height
16.17mm
Between lugs
21.00mm
Material
Super-LumiNova
SLN is the acronym for Super-LumiNova®, a phosphorescent luminescent material. The BG W9 type of SLN, used by Certina, emits the stored light in the form of a bluish glow in the dark. SLN poses no risk to health and is used to coat hands, indices and bezels. Its brightness decreases in the dark after some time, but it is automatically recharged when light strikes it.
Type
Automatic
Model
VALJOUX A05.231
Features
Chronograph 30 min.
Automatic
Silicon
ETA
Swiss Made
Material
Quick-release system
Various Certina models are fitted with a sophisticated quick-change mechanism that enables the wearer to remove the strap easily and swap it for another one. The spring pins in these straps have minute levers that can be pushed down and unlocked with ease.
Buckle material
316L stainless steel
The 316L stainless steel, which Certina uses for cases, bracelets and clasps for instance, is extremely resistant, corrosion-resistant and hygienic. It contains only a very small proportion of nickel, which is not emitted when worn and therefore does not trigger any nickel allergies.
Product sheet
DanskDeutschEestiEnglishEspañolFrançaisItalianoMagyarNederlandsNorsk, nynorskPolskiPortuguês, PortugalSlovenčinaSuomiSvenskaTürkçeČeštinaΕλληνικάРусскийעבריתفارسی日本語简体中文繁體中文한국어

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Ceramic

The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900°C. Certina's ceramic bezels, cabochons and strap elements not only look good – they are also scratch-resistant and hypoallergenic, and retain their intense colour and shine for a long time.

ceramic

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

Ceramic

The ceramic used in watchmaking is hardened in a firing process at a temperature of more than 900°C. Certina's ceramic bezels, cabochons and strap elements not only look good – they are also scratch-resistant and hypoallergenic, and retain their intense colour and shine for a long time.

ceramic

Super-LumiNova®

Super-LumiNova® (SLN) is a luminescent material with phosphorescent properties. In the dark, the SLN type BG W9 used by Certina emits the light stored as a blue shimmer. SLN does not damage your health in any way and is used in coatings on hands, indices and bezels. It progressively loses its phosphorescence in darkness, but automatically regains it under light.

super-luminova

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal