DS Action Lady Diamonds

Women watch ∙ Quartz ∙ Mother of pearl ∙ Diamond(s) ∙ PVD coating ∙ 316L stainless steel

Reference: C032.051.22.126.00
Women watch ∙ Quartz ∙ Mother of pearl ∙ Diamond(s) ∙ PVD coating ∙ 316L stainless steel - #0
Women watch ∙ Quartz ∙ Mother of pearl ∙ Diamond(s) ∙ PVD coating ∙ 316L stainless steel - #0
NOK 7 490.-
?
Reserve in boutique
The DS Action Lady is more than just a thing of beauty. Its Precidrive™ quartz calibre has been certified as a chronometer by the prestigious COSC testing institute. And as if that weren't enough, the watch is also water-resistant up to 20 bar. Make no mistake, there's more to this Lady than meets the eye.

Variants

Technical specifications

Reference
C032.051.22.126.00
Warranty
3-year warranty
Weight net
96.00g
Color
Mother of pearl
Material
Diamond(s)
Mother of pearl
Type
Quartz
Model
F06.411
Features
Quartz
PrecidriveTM
The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.
End of life
Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.
Chronometer
A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.
ETA
Swiss Made
Material
PVD coating
316L stainless steel
Buckle material
316L stainless steel
Reference
C032.051.22.126.00
Warranty
3-year warranty
Weight net
96.00g
Case material
316L stainless steel
Bezel material
PVD coating
316L stainless steel
Glass
Antireflection treatment on one side
Sapphire crystal
Water resistance
Up to a pressure of 20 bar (200 m)
Diameter
33.80mm
Height
9.13mm
Between lugs
15.00mm
Color
Mother of pearl
Material
Diamond(s)
Mother of pearl
Type
Quartz
Model
F06.411
Features
Quartz
PrecidriveTM
The name of an innovative technology which ensures the utmost accuracy at Certina: The timepieces with Precidrive(TM) quartz calibres achieve real chronometer precision. With a rate deviation of +/-10 seconds per year, a Precidrive(TM) timepiece is around eight to ten times more accurate than traditional quartz timepieces.
End of life
Some Certina quartz timepieces - and all Precidrive(TM) models without exception, whether a three-hand variant or a chronograph - have an end of life (EOL) indicator. It indicates that the battery has reached the end of its life: When this is the case, the seconds hand continues to move, but in four-second increments only, and the battery should be replaced within the next two weeks.
Chronometer
A timepiece is only permitted to be called a chronometer if it has been awarded a certificate of precision as a result of passing demanding tests set by an independent test institute. The "Contrôle Officiel Suisse des Chronomètres", known as COSC for short, is the official Swiss chronometer testing institute, which certifies both mechanical calibres and quartz movements.
ETA
Swiss Made
Material
PVD coating
316L stainless steel
Buckle material
316L stainless steel
Product sheet
DanskDeutschEestiEnglishEspañolFrançaisItalianoMagyarNederlandsNorsk, nynorskPolskiPortuguês, PortugalSlovenčinaSuomiSvenskaČeštinaΕλληνικάРусскийעבריתالعربيةفارسی日本語简体中文繁體中文한국어

Materials

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

PVD

Diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

diamonds

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal

Stainless steel

The 316L stainless steel which Certina uses for cases, bracelets and clasps, for instance, is extremely resistant, corrosion-resistant and hypoallergenic. It contains only a very small proportion of nickel, which is not released when worn and therefore does not trigger any nickel allergies.

stainless steel

PVD

PVD is the abbreviation for physical vapour deposition and refers to a modern coating method through which a material, for instance gold, can be transferred in a vaporised form, to a steel or titanium substrate. The result is as fine as it is durable. PVD is resistant, corrosion-resistant and very hard.

PVD

Diamonds

Considered to be the king of all gemstones, diamond is the hardest natural material in the world. The quality of diamond is classed according to the “four C's”:Cut: The more facets the stone has, the more intensely it reflects the light. Certina uses brilliants (full-cut diamonds) in its watch-cases and single-cut diamonds on dials.Colour: At first sight you might think that diamonds are white. Experts, however, can identify their subtle shades of colour. Certina uses Top Wesselton diamonds only.Clarity: Almost all diamonds have tiny flaws, called inclusions, which can be seen with a jeweller’s loupe. Certina uses stones in the highly desirable VSI – very small inclusions – class.Carat: The unit indicating the weight of a diamond. One carat is equivalent to 0.2g.Certina only uses diamonds which meet the requirements of the Kimberley Process, an international system for certifying raw diamonds. The system aims to stop the trade in smuggled diamonds (so-called “blood diamonds”).

diamonds

Mother-of-pearl

This organic material, which Certina uses for particularly precious dials on women's watches, comes from the innermost layer of shell of some molluscs. Iridescent, shimmery mother-of-pearl is very brittle and must be processed with great care, which makes it even more valuable.

mother of pearl

Sapphire crystal

Sapphire watch crystal is made of aluminium oxide power (Al2O3) heated to over 2000°C. The resultant sapphire nugget is cut with great precision into fine slices, trimmed and polished. Sapphire is extremely scratch-resistant, shock-resistant and is very transparent. This is why sapphire crystal is an essential element in the DS Concept and is used by Certina in all of its models to protect the dials.

sapphire crystal